© Copyright Our Wall
With the expansion of the range of using 5.5mm medical endoscope camera module price, doctors in various departments use 5.5mm medical endoscope camera module price more and more frequently. 5.5mm medical endoscope camera module price is a delicate medical device, but as long as it can be used and maintained correctly, damage can be avoided.
1. After using the 5.5mm medical endoscope camera module price, it should be washed clean and the water stains should be dried. If there are stains on the front of the lens, it should be wiped gently with lens paper, cotton swab or fine gauze.
2. The 5.5mm medical endoscope camera module price shall be kept in a special counter and placed in a special packing box lined with soft sponge or polyurethane foam.
3. All 5.5mm medical endoscope camera module prices and surgical instruments shall be stacked neatly, and shall not be placed in an overlapping manner. After the box cover is covered, the internal endoscope and instruments shall not collide with each other during handling.
4. When taking out or putting in the 5.5mm medical endoscope camera module price, hold both hands flat and handle gently. As the endoscope tube is very thin, it will be bent and deformed when it is squeezed, bumped, bent, or dropped, resulting in damage to the lens or optical axis offset, resulting in unclear images or unusable images. Therefore, when taking out or putting in the 5.5mm medical endoscope camera module price from the packaging box, gently take out or put in the tube with both hands flat, and do not lift a section to pull it out.
5. When the 5.5mm medical endoscope camera module price is moved in a hard container such as a tray, it should be placed separately from other instruments to avoid excessive turbulence and collision with the camera.
6. The packing box shall be provided with desiccant to keep the box dry.
7. Some 5.5mm medical endoscope camera module prices are not resistant to high temperature and high pressure. This is mainly because the epoxy resin glue used for the mirror end packaging will open under high temperature and pressure, causing water to enter the mirror tube. After the optical system enters the water, the vision will be blurred. Therefore, this kind of endoscope cannot be used in high temperature and high pressure methods such as boiling and high pressure steam * *.
5.5mm medical endoscope camera module price https://www.hengal-tech.com/3-7mm-industrial-endoscope-camera-module-3-7mm-pshow/15.html
During the use of industrial thread twisting machine exporter, how to deal with the situation of high exhaust temperature? As the manufacturer of glass fiber industrial thread twisting machine exporter, let us all know what causes the high exhaust temperature of industrial thread twisting machine exporter!
1、 Reduce the suction temperature and strengthen the ventilation of the wire drawing room. An exhaust hood is added on the roof of the wire drawing machine room to remove hot gas. The temperature in the control room should not be too high, especially in hot summer, and the temperature in the machine room should not exceed 40 ℃.
2、 The condensate temperature can be reduced by increasing the heat exchange area and the running water. The water temperature should be kept at 18 ℃ in winter and 24 ℃ in summer.
3、 Increase the flow of condensate. Through calculation, the difference between the input temperature and output temperature of condensate is 15 ℃, and the condensate flow is 3.7 L/s.
4、 Clean the scale and sediment in the condensate. Add detergent into the condensate system to avoid poor thermal conductivity.
industrial thread twisting machine exporter https://www.newheli.com/Do-you-know-the-key-points-of-twisting-machine-operation.html
First of all, when purchasing Dust Extractor Pleated Filter Cartridges, the appearance should be checked. Dust Extractor Pleated Filter Cartridges is a very suitable product in the industry that can protect the health and environment of workshop staff.
If the appearance of the collector machine is qualified, you must consider the actual use of the machine. Generally, you can test it when you purchase it. You must observe it carefully during the experiment. The second -stage test, outside the collector's ZUI is to isolate large particulate matter by ZUI simple devices. After ZUI, then observe whether the oil fog on the ground has been adsorbed clean. One of the key functions of the oil mist collecting purifier is to be able to absorb the oil mist in the factory. From the condition of the oil droplets on the floor, the quality of the purifier can be judged.
Dust Extractor Pleated Filter Cartridges Way: This machine uses centrifugal technology. First, the impeller rotates a vacuum negative pressure. The fog particles are first filtered by the filter, attached to the surface of the filter, gathered into a drop, dripping into the oil groove to form a filtration. The remaining air -soluble glue particles form airflow under the driving of the impeller, condensed into liquid phases, and passed through the mid -effect filter. Interception, gathered drip tank again to form secondary gas filtration. After ZUI, a small particle that intercepts the omitted particles by impact. Dust Extractor Pleated Filter Cartridges The air purified of the air can be discharged into the indoor circulation, and the separated oil can be used again after the oil outlet is discharged into the collecting cylinder.
dust extractor pleated filter cartridges https://www.kaisenfilter.com/Filter-Cartridges
Advantages of gas piping automatic butt welding machine The transformer is the same as the low-power copper rod advancements of gas piping automatic butt welding machine, which uses a stepless regulating transformer, which is generally controlled by the controller for grading, mainly divided into 99 levels of voltage regulation, so as to control the current Output.
The common power of this series of transformers are: 16KW 25KW
Its features and advantages are:
1. Using high-quality high-permeability silicon steel sheets, the silicon steel sheets are cut and crossed to form the shell, so that most of the magnetic flux is confined to the iron core, and the coil can obtain a relatively high degree of magnetic coupling.
2. Two sets of all-copper wire covered with different turns are used as coils, and they are combined with each other inductance. When an AC current is applied to one set of coils, an AC voltage with the same frequency will be induced in the other set of coils. , so as to better reduce the pressure.
3. Use angle iron bracket to fix, stable and corrosion-resistant
4. The exterior is coated with insulating paint and baked solid, and the service life is longer, up to more than 20 years.
5. The current is large and the voltage is small. The maximum no-load voltage of the 25KW advancements of gas piping automatic butt welding machine is only 3.65V, which is safer.
advantages of gas piping automatic butt welding machine https://www.dowelding.com/Welding-process-and-principle-of-butt-welding-machine.html