How to judge the quality of Dust Extractor Pleated Filter Cartridges? from tangram's blog

First of all, when purchasing Dust Extractor Pleated Filter Cartridges, the appearance should be checked. Dust Extractor Pleated Filter Cartridges is a very suitable product in the industry that can protect the health and environment of workshop staff.

If the appearance of the collector machine is qualified, you must consider the actual use of the machine. Generally, you can test it when you purchase it. You must observe it carefully during the experiment. The second -stage test, outside the collector's ZUI is to isolate large particulate matter by ZUI simple devices. After ZUI, then observe whether the oil fog on the ground has been adsorbed clean. One of the key functions of the oil mist collecting purifier is to be able to absorb the oil mist in the factory. From the condition of the oil droplets on the floor, the quality of the purifier can be judged.

Dust Extractor Pleated Filter Cartridges Way: This machine uses centrifugal technology. First, the impeller rotates a vacuum negative pressure. The fog particles are first filtered by the filter, attached to the surface of the filter, gathered into a drop, dripping into the oil groove to form a filtration. The remaining air -soluble glue particles form airflow under the driving of the impeller, condensed into liquid phases, and passed through the mid -effect filter. Interception, gathered drip tank again to form secondary gas filtration. After ZUI, a small particle that intercepts the omitted particles by impact. Dust Extractor Pleated Filter Cartridges The air purified of the air can be discharged into the indoor circulation, and the separated oil can be used again after the oil outlet is discharged into the collecting cylinder.

dust extractor pleated filter cartridges https://www.kaisenfilter.com/Filter-Cartridges